.218 - .000 +.010 5.54 .00 +.25 across flats 6. refer to cap10-01 for cable assembly procedure. notes: unless otherwise specified 1. for general series specifications, see sd74-0000. 2. material specifications: brass per astm b16. 3. finish specifications: .000030 min. gold per astm b488 over .000050 min. nickel per ams qq-n-290. 4. electric al specifications: current rating: 30 amps 5. suggested for use with 12 ga wire or equivalent. catalog p/n: 01358 decimal: .xx [x.x] .01 [0.3] dao .xxx [x.xx] .005 [0.13] 01/07/09 dao date appd by er 11418 description g rev 08/12/03 jed date approved 08/16/03 mg date approved 08/16/03 cwb date approved 08/12/03 jem date drawn revised per drawing customer angles: 2 scale: 8:1 per asme y14.5m-1994 unless otherwise specified: dimensions are in inches [mm] tolerances: winchester electronics corporation 62 barnes industrial road north wallingford, connecticut 06492 of a sht 1 12 awg, 30 amp rev g SD01358 powersnap right angle solder mount 1 3.66 .03 .003 .08 2.67 6.99 .275 .105 .167 4.24 .144 .001 .144 3.66 recommended cable trim dimensions scale: 2:1 6.35 .250 .095 max 2.41
|